ʻO Optical grade polyester base film GM10A kahi kiʻi kiʻi kiʻekiʻe kiʻekiʻe i kūpono no nā ʻano noi. He hale hana hoʻohua mākou i ka hāʻawi ʻana i nā huahana kiʻekiʻe a me nā lawelawe.
Ka inoa a me ke ʻano: Optical BOPET GM10A
Nā hiʻohiʻona nui o nā huahana:
He kiʻekiʻe ka mālamalama o ka huahana, haʻahaʻa haze waiwai, haʻahaʻa haʻahaʻa roughness, flatness maikaʻi a me ka maikaʻi hiʻona maikaʻi, etc.
Ke noi nui:
Hoʻohana ʻia no ke kiʻi ʻoniʻoni ITO, kiʻiʻoniʻoni laser, kiʻiʻoniʻoni pale optical, reflector a me ka lipine hi-class etc.
Kapili:
Pepa ʻikepili:
Aia ka mānoanoa o GM10A: 36/38μm, 50μm a me 100 μm etc.
| WAIWAI | UNIT | KA WAIWAI KULA | ANOAI HOAO | |||
| KA MANAWALEA | μm | 38 | 50 | 100 | ASTM D374 | |
| KA IKAIKA TENSILE | MD | MPa | 210 | 219 | 200 | ASTM D882 |
| TD | MPa | 230 | 251 | 210 | ||
| ELONGATION | MD | % | 125 | 158 | 140 | |
| TD | % | 110 | 135 | 120 | ||
| KA HOʻOPIʻI WELA | MD | % | 1.4 | 1.5 | 1.4 | ASTM D1204 （150 ℃×30min） |
| TD | % | 0.2 | 0.4 | 0.2 | ||
| KA HUI O KA HUI | μs | — | 0.32 | 0.42 | 0.47 | ASTM D1894 |
| μd | — | 0.29 | 0.38 | 0.40 | ||
| HOOLAHA | % | 90.1 | 90.2 | 89.9 | ASTM D1003 | |
| HAZE | % | 1.5 | 1.7 | 1.9 | ||
| CARITY | % | 99.6 | 99.4 | 99.1 | ||
| PAU PULU | dyne/cm | 52 | 52 | 52 | ASTM D2578 | |
| IKE | — | OK | HANA EMTCO | |||
| OLELO HOOLAHA | Aia ma luna nā waiwai maʻamau, ʻaʻole nā waiwai hōʻoia. | |||||
Hoʻohana wale ʻia ka hoʻāʻo ʻana i ka ʻāʻī ʻana i ka corona i mālama ʻia.
Ma keʻano he hale hana hana, ua loaʻa iā mākou nā lako hana kiʻekiʻe a me kahi ʻōnaehana hoʻomalu maikaʻi koʻikoʻi e hōʻoia i ka paʻa o ka huahana a me ke kūpaʻa. Kūpaʻa mākou i ka hāʻawi ʻana i nā mea kūʻai aku me ka kiʻiʻoniʻoni polyester kiʻekiʻe kiʻekiʻe kiʻekiʻe kiʻekiʻe polyester base film GM10A e hoʻokō i kā lākou mau pono like ʻole a hana i ka waiwai nui no nā mea kūʻai aku.
Ma o ka wehewehe pōkole ma luna a me ka wehewehe kikoʻī o ka huahana, manaʻolana mākou e hāʻawi i nā mea kūʻai aku i kahi ʻike piha.
Ka manawa hoʻouna: ʻAukake-23-2024
